Geoweb® Load Support Request for Project Evaluation

The Geoweb® Load Support System

Request for Project Evaluation Form

Need a preliminary project evaluation? We can assist you in developing the best solution to your problem. Fill out the pertinent project information below, then click on the Send Request button at the bottom of the page. Items marked in red are required to proceed with your preliminary evaluation. If preferred, the Request for Project Evaluation (RFPE) document is also available in .pdf form for printing, completing and faxing to us at Fax: 920-738-1222.

Download RFPE Form

Allow a few days turnaround for each project request. To check on the status of your request, contact Presto Products Company either by Phone: 800-548-3424; 920-738-1328 or email: info@prestogeo.com or contact your local distributor / representative.

The project evaluation will be performed based on specification characteristics, structural values and limits for the Geoweb material manufactured under an ISO 9001:2000 Quality Management program. Any use of this recommendation and/or drawing with materials manufactured by others than Presto Products Company causes the recommendation and/or drawings to become invalid.

Project Information

Project Name

Project City

State/Province

Country

Est. Geoweb Area

m² (ft²)

Describe problem to be solved by the Geoweb system:

Person Requesting Information

Relationship with Project

(Choose all that apply: To make multiple selections, hold Ctrl key down while selecting).

If Other, please explain

Company

Contact Name

Address

City

State/Province

Zip/PC

Phone

Fax

Distributor / Representative Information (if known)

Company

Contact

Office Location

Dist/Rep Project #

Design Information

For what is the Load Support Structure Used?

If Other, please specify

What is the Final Wearing Surface of the Load Support System?

If Other, please specify

What are the Traffic Details?


Maximum Axle Load	kg (lb)	Passes/Day
No. Tires/Axle		Design Life (Years)
Tire Pressure	MPa (lb/in²)
NOTE: If traffic varies (eg. highway pavement), provide traffic count data (or projected traffic data), including distribution of axle loads, or design traffic (eg. Equivalent Single Axle Loads, ESAL's) as determined by the highway authority.

Subgrade Soil Properties

Description	(eg. Medium Dense Silty Sand, Very Soft Clay, etc.)

What is the Subgrade Soil Strength?	(To make multiple selections, hold Ctrl key down while selecting.)
Please enter value(s) of chosen method(s)

Other Test Data or Subsurface Information (if available)

Gradation	(provide curve)
Moisture Content	%
Liquid Limit
Plasticity Index
Depth to Water Table	m (ft)

Construction Material Details


Construction Materials	Material Property	Strength Value

Geoweb Infill:	Unit Density	kN/m³ (lb/ft³)
	Angle of Internal Friction	degree

Asphalt Concrete:	Modulus of Elasticity	MPa (lb/in²)
	Other (Specify)

Aggregate Base:	Compacted CBR Value	%
	R-Value
	Modulus of Elasticity	MPa (lb/in²)
	Other (Specify)

Aggregate Subbase:	Compacted CBR Value	%
	R-Value
	Modulus of Elasticity	MPa (lb/in²)
	Other (Specify)

Conventional Pavement Design and Material / Construction Costs.


Pavement Layer	Thickness mm (in)	Cost

Portland Cement Concrete
Asphalt Concrete
Bituminous Base
Aggregate Base
Aggregate Subbase
Soil Stabilization
Undercutting Subgrade Soil
Geosynthetic (Yes/No)
NOTE: If a conventional pavement design has not been prepared, provide typical cost data for the region.

Deadline Dates

Preliminary Design Needed By Date
Projected Bid Date
Planned Construction Startup Date

Approvals / Certifications Required by: List Agencies

Basic Load Support System Definitions

Please send any additional plans, drawings, or project information to Presto Products Company via Email: info@prestogeo.com, Fax: 920-738-1222, US Mail: PO Box 2399, Appleton, WI 54912-2399 or Courier: 670 N. Perkins St, Appleton, WI 54914.

If you would like to speak with a Presto Geosystems Representative, please call 800-548-3424 or 920-738-1328.